(no subject)
Sep. 10th, 2006 05:29 pm![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
afmetalsmithAlso done today: Made a white gold jump ring and got it ready for soldering into a loop on a pendant. This is my first work with nickel white gold, I think, and it behaved fine. I'm not really a fan of it; if I must have white gold, I prefer the palladium alloy. The solder is plumb but easy, roughly similar to hard silver solder, so the soldering should go OK. I just didn't want to turn on the torch set-up and the pickle pot for one tiny thing!
The rest was more clean-up and prep stuff. I got the stuff from making a mold of a wax carving put away, and replaced the 6 different grit sanding disks on their respective mandrels, since they were completely worn out. Since I use them wet, the adhesive they come with doesn't work so I have to use contact cement.
And I finished sanding/grinding the cloisonne smiley, so he's ready for the fire-polishing tomorrow when I have the kiln on for the plique.
Pretty soon I'll get going on some photo editing...
The rest was more clean-up and prep stuff. I got the stuff from making a mold of a wax carving put away, and replaced the 6 different grit sanding disks on their respective mandrels, since they were completely worn out. Since I use them wet, the adhesive they come with doesn't work so I have to use contact cement.
And I finished sanding/grinding the cloisonne smiley, so he's ready for the fire-polishing tomorrow when I have the kiln on for the plique.
Pretty soon I'll get going on some photo editing...
